Helpfu Hints: Checking for Leaks

	Helpful Hints: `Checking for Leaks`
	The best method for determining whether a leak exists is to take actual meter readings. LOCATE YOUR WATER METER The meter may be in your basement or mechanical room where the water service enters the building. Meter pits are out near the street or curb. If you have any questions as to the location of your meter please contact our customer service department and a representative will answer any questions you may have. LEAK DETECTION INDICATOR First look on the face of the meter and observe the small red or black triangle. This triangle is considered a low flow or leak detection indicator. Check and see if the triangle is turning. If the triangle is turning and you have taken into account no water is being used including appliances such as an icemaker, a humidifier, a water softener, etc., water is being used somewhere within your plumbing system. READ THE METER TWICE Read the meter first at night, after the day's usage has ended and again in the morning before any water is used. Find the difference by subtracting the first reading from the second reading to calculate the consumption used overnight. LOOK FOR LEAKS The most common invisible leak is your toilet. Check for leaks by adding a small amount of food coloring in the tank. Wait for 15 minutes and see if the color appears in the bowl of your commode. VERIFY REPAIRS After making repairs repeat the above mention procedures to verify that the leak has been repaired.